DKL L2-S300, Operating Instructions Manual, Page: 36 / 327

36
Every time a double click is performed, the colour temperature in
Kelvin (Tk) of the light changes. Repeat the procedure until the
desired colour temperature is shown on the indicator light.
2 beeps will inform the user that Tk is changing.
Warning against danger of wear and corrosion and falling suspended mass.
For all metal or plastic parts it is strictly forbidden to use substances that are abrasive, corrosive, acids,
substances containing chlorine or chloride ions, phosphorous or phosphorous ions or detergents with
Trilene base, petrol, white spirit, chlorine or similar.
Do not use detergents-disinfectants containing the following substances to clean plastic parts:
- Ammonium Hydroxide
- Sodium Hydroxide
- Hydrogen peroxide
- Ammonium Chloride
- Methylene chloride
- Methyl alcohol
- Acids and corrosive substances of all kinds.
It is forbidden to directly spray any chemical substance on the device.
LED.light EVA Operating Lamp
Indicator light
yellow
4000 Kelvin Indicator light
white
5000 Kelvin Indicator light
blue
5700 Kelvin
Removal of the handles
To remove the handle, unscrew knob “A” and remove it from the
support.
DECONTAMINATION AND DISINFECTION
Before sterilising the handles, they must be decontaminated and
disinfected.
The handles cannot be disinfected by
thermo-disinfection.
STERILIZATION
The handles must be packaged in compliance with
EN 868-5. The handles can be sterilised with standard
cycles 121°/134° C up to two hundred (200) cycles or
however up to loss of the mechanical performance.
Cycle EN 13060 Temperature Pressure Holding Time Minimum
B 121°C 207 kPa 15 min.
B 134°C 308 kPa 3 min.