DKL L2-S300, Operating Instructions Manual, Page: 242 / 327

7560100003L02 1801V002
19
13 Information about EMC in accordance with EN 60601-1-2
13.1 General information
The information in this leaflet includes excerpts from the relevant European standards for electrical,
medical devices It must be observed when installing Dürr Dental devices or combining them with
products of other manufacturers If you are uncertain about anything, please refer to the complete
standard
13.2 Abbreviations
EMC Electromagnetic compatibility
HF High frequency
U
T
Rated voltage of the device (supply voltage)
V
1
, V
2
Compliance level for the test in acc with IEC 61000-4-6
E
1
Compliance level for the test in acc with IEC61000-4-3
P Rated power of the transmitter in Watts (W) in accordance with the specifications of the
transmitter manufacturer
d Recommended safety distance in metres (m)
13.3 Guidelines and manufacturer's information
Electromagnetic emissions for all devices and systems
The device is designed for operation in an electromagnetic environment as specified below The cus-
tomer or operator of the device should ensure that the device is operated in such an environment
Interference emission
measurements Compli-
ance Electromagnetic environment - guidelines
HF emissions in accord-
ance with CISPR 11 Group 1 The spittoon valve uses HF energy only for its internal
functions For this reason, HF transmissions are very low
and it is unlikely that any interference will be caused to
neighbouring electronic devices
HF emissions in accord-
ance with CISPR 11 Class B The spittoon valve is suitable for use in all facilities in-
cluding those in living areas and areas that are directly
connected to the public mains electricity supply that
also supplies buildings used for residential purposes
Harmonics in acc with
IEC 61000-3-2 Not applica-
ble
Voltage fluctuations/flickers
in acc with IEC 61000-3-3 Not applica-
ble
Appendix
EN