DKL L2-S300, Operating Instructions Manual, Page: 258 / 327

7117100018L30 1712V002
7
Product description
4 Technical data
4.1 CAS 1 Combi-Separator
Electrical data – centrifuge motor
Nominal voltage V 24 AC
Frequency Hz 50 / 60
Rated power VA 100
Electrical data – electronics
Nominal voltage V 24 AC
Nominal current A 0�2
Signal input from the hose manifold V 24 AC/DC
Media
Air flow volume l/min ≤ 300
Flow rate high
The suction system must be suitable for a high flow rate in accordance with EN ISO 10637�
Max� pressure
hPa/mbar -160
Min� volume of aspiration fluid
max� l/min
l/min
≥
0�1
≤ 1�0
Water supply, spittoon l/min ≤ 3
Total flow of waste liquids l/min ≤ 4
Usable volume in amalgam collecting
container
ccm c� 90
Replacement interval 4 - 6 months
General data
Drive motor nominal speed rpm 2800
Operating mode S5 95% DC*
Type of protection IP 20
Protection class II
Noise level ** approx� dB(A) 56
Dimensions (H x W x D) mm 255 x 151 x 110
Weight, approx� kg 2�7
Separation rate % ≥ 95
Medical device (class) I
* DC = duty cycle
** Noise levels in acc� with EN ISO 1680 "airborne noise emissions"; measured in a sound-proofed
room� The levels are average values with a tolerance of ± 1�5 dB(A)� Higher values may be
obtained in rooms with reverberating sound characteristics�
Ambient conditions during storage and transport
Temperature °C -10 to +60
Relative humidity % < 95
Ambient conditions during operation
Temperature °C +10 to +40
Relative humidity % < 70
EN