DKL L2-S300 Operating Instructions Manual Download Page 141

Page: 141 / 327

Hygiene and maintenance

Automated cleaning and disinfection

W&H recommends automated cleaning and disinfection using a washer-disinfector (WD).

> Read the notes, follow the instructions and heed the warnings provided by the manufacturers of

washer-disinfectors, cleaning agents and/or disinfectants.

> The medical device is not approved for automated processing in a washer-disinfector.

Evidence of the tips’ and the tip changer’s basic suitability for effective automated disinfection was provided

by an independent test laboratory using the »Miele PG 8582 CD« washer-disinfector (Miele & Cie. KG,

Gütersloh) and the »Dr. Weigert neodisher® MediClean forte« cleaning agent (Dr. Weigert GmbH & Co. KG,

Hamburg) according to ISO 15883.

> Cleaning at 55°C (131°F) – 5 minutes

> Disinfection at 93°C (200°F) – 5 minutes

Mechanical cleaning and disinfection of the tips

Use the Miele A 814 adapter.

Summary of Contents for L2-S300








































































































































































































































































































































Search results

Summary of Contents for L2-S300

Reviews:

DKL L2-S300, Operating Instructions Manual, Page: 141 / 327

Search results

Summary of Contents for L2-S300

Reviews: