DKL L2-S300, Operating Instructions Manual, Page: 59 / 327

59
Error Messages
Icon Error description Remedy
Battery of the foot controller almost
empty. Change the battery in the foot controller.
The message on the display can be
acknowledged
Instrument is not found.
Call customer service!
Several instruments have been taken
out. Check whether the instruments are
properly inserted in the instrument
holders.
Pump is not recognised. In the applications turbine, motor and
scaler, the message can be acknow-
ledged. The system switches
automatically to the coolant water. With
the option “ImplantMed-motor” the pump
is obligatory. Otherwise, the ImplantMed
motor cannot be used.
Call customer service!
Temperature of the drive motor for the
treatment chair is too high. Acknowledge the error message on the
display. Let the motors cool down for
about 10 minutes.
Defect in the controls of the treatment
chair. Message can be acknowledged on the
display. The treatment chair can be
moved manually in the emergency mode.
Call customer service!
Voltage fl uctuations Switch off the treatment unit. Switch the
treatment unit on again after 1 minute. If
the error message appears again after
this restart,
Call customer service!