DKL L2-S300, Operating Instructions Manual, Page: 234 / 327

7560100003L02 1801V002
11
Installation
7.3 Establishing the compressed
air connection
i
Disconnect a suitable compressed air line
from the treatment unit
i
Install a T-piece with 4 mm branch in the com-
pressed air line
i
Connect a compressed air hose to the T-
piece
i
Route the compressed air hose to the spit-
toon valve, cut it off straight and insert it
To pull off the compressed air hose from
the spittoon valve, press the black sleeve
on the compressed air connection in-
wards
7.2 Installation of the spittoon valve
The cleaning function can be activated
via the yellow button For this reason the
spittoon valve should be positioned in an
easily accessible location If this is not
possible, a separate switch control panel
can be used as an optional accessory
i
Disconnect the treatment unit from the power
supply and secure it so that it cannot be
switched back on again
i
Firmly screw the spittoon valve onto a suitable
place on the treatment unit
i
Connect the drain hose from the spittoon to
the inlet of the spittoon valve
i
Connect the outlet of the spittoon valve to the
suction pipe
EN