DKL L2-S300, Operating Instructions Manual, Page: 243 / 327

20
7560100003L02 1801V002
Appendix
Resistance to electromagnetic interference (immunity) for all devices and systems
The device is designed for use in electromagnetic environments specified below The customer or op-
erator of the device should ensure that the device is operated such an environment
Interference im-
munity tests IEC 60601 - test
level Compliance level Electromagnetic environment
- guidelines
Electrostatic dis-
charge (ESD) in acc
with IEC 61000-4-2
±
8 kV contact dis-
charge
±
15 kV air discharge
±
8 kV contact dis-
charge
Floors should be made of wood
or cement, or covered with ce-
ramic tiles If the floor is covered
by synthetic material, then the
relative humidity must be at
least 30%
Electrical fast tran-
sient/burst immunity
test in accordance
with IEC 61000-4-4
±
2 kV for mains ca-
bles
±
1 kV for input and
output cables
±
2 kV for mains ca-
bles
±
1 kV for input and
output cables
The quality of the supply voltage
should correspond to a typical
commercial or hospital environ-
ment
Voltage surge in ac-
cordance with
IEC 61000-4-5 ± 1 kV voltage outer
conductor/outer
conductor
± 2 kV voltage outer
conductor/earth
± 1 kV push-pull
voltage
Not applicable
The quality of the supply voltage
should correspond to a typical
commercial or hospital environ-
ment
Magnetic field for a
supply frequency
(50/60 Hz) in ac-
cordance with
IEC 61000-4-8 30 A/m 30 A/m The magnetic fields at mains
frequency should be within the
range of typical values encoun-
tered in a commercial or hospi-
tal environment
Table 1: Resistance to electromagnetic interference (immunity) for all devices and systems
EN