DKL L2-S300, Operating Instructions Manual, Page: 30 / 327

30
Starting the Piezo Scaler
See also operating instructions from W&H Dentalwerk
Bürmoos GmbH Piezo scaler handpiece.
> Remove piezo scaler from the instrument holder.
My Favourites - Program confi g
Drive unit with a piezoceramic oscillation system, which sets the scaler tip into
linear oscillation. The drive unit is used for the removal of supragingival calculus
and subgingival concrements as well as for endodontic applications and the
preparation of hard tooth structure.
Power setting range: 1-40.
Activating programmes (up to 6 programmes possible)
> Activate Program confi g.
Activating Programme P1. Continue this process for the desired number of
programmes (P1 to P6).
back
Setting the power
> Activate power on the touchscreen
9
.
Decrease / increase
> Activate the start signal at the foot controller
1
.
> Put the scaler back into its holder.
> The last settings are now saved.
>An overview of the correct power setting is provided for each type of tip.
>Only use tips approved by W&H and the corresponding tip changer or fork wrench.
>Check the wear of the tips with the enclosed tip card.
>Replace tips with visible material wear. The tips must not bere-bent and
re-sharpened.
>Make sure that the original shape of the tip is not changed (e.g. by falling down).
Display work mode: scaler
You can fi nd an application fi lm at www.youtube DKL Germany.
Video: DKL CHAIRS L2-D2 SERIES FUNCTIONS PIEZO SCALER
LINK: https://youtu.be/9ddIgJzl0Go