Delta CT2000 Series, User Manual

Page: 180 / 634

Chapter 11 Summary of Parameter Settings

CT2000 Series
11-25
Pr. Explanation Settings
Factory
Setting
06-32 Output Frequency at Malfunction
0.00~599.00Hz
Read
only
06-33 Output Voltage at Malfunction
0.0~6553.5 V
Read
only
06-34 DC Voltage at Malfunction
0.0~6553.5 V
Read
only
06-35 Output Current at Malfunction
0.00~6553.5 Amp
Read
only
06-36 IGBT Temperature at Malfunction -3276.7~3276.7
℃
Read
only
06-37
Capacitance Temperature at
Malfunction
-3276.7~3276.7
℃
Read
only
06-38
Motor Speed in rpm at
Malfunction
-32767~32767 rpm
Read
only
06-39 Torque Command at Malfunction -3276.7~3276.7 %
Read
only
06-40
Status of Multi-function Input
Terminal at Malfunction
0000h~FFFFh
Read
only
06-41
Status of Multi-function Output
Terminal at Malfunction
0000h~FFFFh
Read
only
06-42 Drive Status at Malfunction 0000h~FFFFh
Read
only
06-43 Reserved
06-44 Reserved

06-45 Treatment to Output Phase Loss
Detection (OPHL)
0: Warn and keep operation
1: Warn and ramp to stop
2: Warn and coast to stop
3: No warning
3

06-46 Deceleration Time of Output
Phase Loss
0.000~65.535 sec 0.500

06-47 Current
Bandwidth 0.00~100.00% 1.00

06-48 DC Brake Time of Output Phase
Loss
0.000~65.535sec 0.100

06-49 LvX
Auto Reset
0: Disable
1: Enable
0

06-50 Time for Input Phase Loss
Detection
0.00~600.00 sec.
0.20
06-51 Reserved

06-52 Ripple of Input Phase Loss
460V model: 0.0~320.0 Vdc
60.0

06-53 Treatment for the detected Input
Phase Loss (OrP)
0: warn and ramp to stop
1: warn and coast to stop
0
06-54 Reserved

06-55 Derating
Protection
0: constant rated current and limit carrier wave by
load current and temperature
1: constant carrier frequency and limit load current
by setting carrier wave
2: constant rated current(same as setting 0), but
close current limit
0

06-56 PT100 Detected Level 1
0.000~10.000V 5.000

06-57 PT100 Detected Level 2
0.000~10.000V 7.000

06-58 PT100 Level 1 Frequency
Protect
0.00~599.00Hz 0.00

06-59 PT100 Activation Level Delay
Time
0~6000 sec. 60