Delta CT2000 Series, User Manual, Page: 335 / 634

Chapter 12 Description of Parameter Settings

CT2000 Series
12.1-09-11

~ Reserved

Response Delay Time
Factory Setting: 2.0
Settings 0.0~200.0ms

This parameter is the response delay time after AC drive receives communication command as
shown in the following.
PC or PLC command
Handling time
of the AC drive
Response Delay Time
Pr.09-09
Response Message
of the AC Drive
RS-485 BUS

Main Frequency of the Communication
Factory Setting: 60.00
Settings 0.00~599.00Hz

When Pr.00-20 is set to 1 (RS485 communication). The AC motor drive will save the last
frequency command into Pr.09-10 when abnormal turn-off or momentary power loss. After reboots
the power, it will regards the frequency set in Pr.09-10 if no new frequency command is inputted.

Block Transfer 1

Block Transfer 2

Block Transfer 3

Block Transfer 4

Block Transfer 5

Block Transfer 6

Block Transfer 7

Block Transfer 8

Block Transfer 9

Block Transfer 10

Block Transfer 11

Block Transfer 12

Block Transfer 13

Block Transfer 14

Block Transfer 15

Block Transfer 16
Factory Setting: 0
Settings 0~65535

There is a group of block transfer parameter available in the AC motor drive (Pr.09-11 to Pr.09-20).
User can use them (Pr.09-11 to Pr.09-20) to save those parameters that you want to read.