Chapter 16 PLC Function
CT2000 Series
16-5
16-3 Turn on
16-3-1 Connect to PC
Start operation of PLC functions in accordance with the following four steps
1. After pressing the Menu key and selecting 4: PLC on the KPC-CC01 digital keypad, press the
Enter key (see figure below).
NOTE
If the optional KPC-CE01 digital keypad is used, employ the following method:
Switch to the main PLC2 screen: After powering up the drivers, press the
key on the KPC-CE01 once to
switch to the function screen, which will then display "PrSET." After using the
up or down button to switch to the
"PLC" screen, and then press
to enter PLC function settings. Afterwards, press the Up key to switch to
"PLC2," and then press
. The screen will now display "PLSn" and flash, indicating that the internal PLC
currently has no program, and this error message can be ignored. If the PLC has an editing program, the screen will
display "End," and will jump back to "PLC2" after 1 to 2 seconds. When no program has been downloaded to the
drivers, the program can continue to run even if a PLC warning message appears.
2. Wiring: Connect the driver's RJ-45 communications interface to a PC via the RS485
RS485
CT2000
Summary of Contents for CT2000 Series
