PCG-K Series CD/DVD Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N T99860099
Rev. B
1/2
Step 1
.
Power on the PC,
eject the CD/DVD drive tray by
pressing the button on the drive
door. Next, properly turn off the
PC, leaving the tray ejected.
Step 2
.
Close the screen.
To prevent any kind of cosmetic damages and
scratches, place your PC upside down on top of a
soft surface with the ports facing you.
¾
If after reading this information and instructions you are not comfortable doing the repair, please
call toll free 1-866-651-7669 for further assistance.
¾
Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o
Hold parts by the edges, away from exposed circuitry when possible.
o
Do not walk around excessively as this promotes static build-up.
¾
Sony will not be held responsible for any cosmetic scratches or damage due to placement of your
Notebook Computer on an inappropriate surface. Prior to initiating replacement of the CD/DVD
drive, set up an appropriate work environment; a towel spread across a clean table will help
prevent scratches.
¾
Remove all jewelry before beginning the work, these could potentially scratch the surface of your
Notebook Computer or short out electronic components.
¾
Electronic components shown in the pictures may differ slightly in appearance from the ones you
received.
IMPORTANT!
PLEASE READ BEFORE YOU START
Step 3
.
IMPORTANT!
Disconnect the power cord and
remove the battery.
F
AILURE TO DO
SO CAN RESULT IN DAMAGE TO THE
PC
.
