manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual

Getting Started With Dell PowerEdge R910? Look no further! Download the free user manual for this exceptional server right from our website. Learn how to maximize its performance, configure settings, troubleshoot issues, and more. Don't miss the chance to unlock the full potential of your PowerEdge R910. Get your manual now!

Share
Download
background image

154

Installing System Components

17

If applicable, install the memory-riser blanks. See "Installing a Memory-
Riser Blank" on page 100.

18

Close the system. See "Closing the System" on page 90.

19

Reconnect your system and peripherals to their electrical outlets, and turn 
on the system.

Power Supplies

Your system supports the following power supply modules:

•

1100 W (high output power supply)

•

750 W (energy smart power supply)

When a 10 Gb I/O card is installed, the system must have at least two power 
supplies connected to an A/C power supply. The system requires two power 
supplies to provide standby power to the system. With a 1 GbE I/O card, only 
one PSU is required to provide standby power to the system. Table 3-4 and 
Table 3-5 lists the power supply redundancy modes for a 10 Gb I/O card and a 
1 GbE I/O card.

Table 3-4.

Power Supply Redundancy Modes With a 10 Gb I/O Card

Number of Power Supplies

Redundancy Mode

System Configuration

1

1+0*

Non-redundant 
configuration with inactive 
SFP+ ports 

2

2+0

Non-redundant 
configuration

3

2+0

Non-redundant 
configuration

4

2+2

Redundant configuration

* indicates that the system operates with a limited load.

book.book  Page 154  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments

Related manuals for PowerEdge R910

EAI 580 Reference Handbook preview
580
Brand: EAI Pages: 132
Ace Vision Series User Manual preview
Vision Series
Brand: Ace Pages: 17
Radio Shack TRS-80 III Operation Manual preview
TRS-80 III
Brand: Radio Shack Pages: 30
Radio Shack TRS-80 Technical Manual preview
TRS-80
Brand: Radio Shack Pages: 42
Radio Shack TRS-80 Trsdos & Disk Basic Reference Manual preview
TRS-80
Brand: Radio Shack Pages: 192
Radio Shack TRS-80 Reference Manual preview
TRS-80
Brand: Radio Shack Pages: 274
Radio Shack TRS-80 Service Manual preview
TRS-80
Brand: Radio Shack Pages: 44
Radio Shack TRS-80 Preliminary User'S Manual preview
TRS-80
Brand: Radio Shack Pages: 30
Quanmax QDSP-0200 Series User Manual preview
QDSP-0200 Series
Brand: Quanmax Pages: 39
IEI Technology FLEX-BX100-ULT5 User Manual preview
FLEX-BX100-ULT5
Brand: IEI Technology Pages: 121
Rockler Adjustable Height Workstation Assembly Instructions Manual preview
Adjustable Height Workstation
Brand: Rockler Pages: 8
Jason.L Literail Workstation 6 Person Assembly Instructions preview
Literail Workstation 6 Person
Brand: Jason.L Pages: 4
Compaq ProLiant DL580 Setup And Installation Manual preview
ProLiant DL580
Brand: Compaq Pages: 222
Compaq Compaq Presario,Presario 4103 Quick Setup preview
Compaq Presario,Presario 4103
Brand: Compaq Pages: 2
Digital Equipment PDP-12 Reference Manual preview
PDP-12
Brand: Digital Equipment Pages: 321
Vecow RCX-1000 User Manual preview
RCX-1000
Brand: Vecow Pages: 160
Seville Classics OFF65864 AIRLIFT 25 Quick Start Manual preview
OFF65864 AIRLIFT 25
Brand: Seville Classics Pages: 4
Acer Aspire 3300S User Manual preview
Aspire 3300S
Brand: Acer Pages: 61

Brands by name

Popular brands

Load more brands