manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual, Page: 149 / 210

Share
Download
Dell PowerEdge R910 Hardware Owner'S Manual Download Page 149

Installing System Components

149

6

Remove the cooling fan assembly. See "Removing the Cooling Fan 
Assembly" on page 118.

 

WARNING: 

The heat sink and processor are hot to touch for some time after the 

system has been powered down. Allow the heat sink and processor to cool before 
handling them.

 

CAUTION: 

Never remove the heat sink from a processor unless you intend to 

remove the processor. The heat sink is necessary to maintain proper 
thermal conditions. 

7

Release one of the heat-sink release levers. See Figure 3-29.

8

Wait 30 seconds for the heat sink to loosen from the processor.

9

Release the other heat-sink release lever.

10

Gently lift the heat sink off of the processor and set the heat sink aside 
upside down (thermal grease side facing up).

book.book  Page 149  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments