manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual, Page: 35 / 210

Share
Download
Dell PowerEdge R910 Hardware Owner'S Manual Download Page 35

About Your System

35

E1A15

SAS cable B 

failure. 

Check 

connection.

SAS cable B is missing or 
bad.

Reseat the cable. If the 
problem persists, replace 
cable.

If the problem persists, 
see "Getting Help" on 
page 203

E1A1D

Control panel 

USB cable not 

detected. 

Check cable.

USB cable to the control 
panel is missing or bad.

Reseat the cable. If the 
problem persists, replace 
cable.

If the problem persists, 
see "Getting Help" on 
page 203.

E2010

Memory not 

detected. 

Inspect 

DIMMs.

No memory was detected in 
the system.

Install memory or reseat 
the memory risers and 
memory modules. See 
"Installing a Memory 
Riser" on page 101, 
"Installing Memory 
Modules" on page 102 or 
"Troubleshooting System 
Memory" on page 181.

E2011

Memory 

configuratio

n failure. 

Check DIMMs.

Memory detected, but is not 
configurable. Error detected 
during memory 
configuration.

See "Troubleshooting 
System Memory" on 
page 181.

E2012

Memory 

configured 

but unusable. 

Check DIMMs.

Memory configured, but is 
unusable. 

See "Troubleshooting 
System Memory" on 
page 181.

E2013

BIOS unable 

to shadow 

memory. Check 

DIMMs.

The system BIOS failed to 
copy its flash image into 
memory.

See "Troubleshooting 
System Memory" on 
page 181.

Code

Text

Causes

Corrective Actions

book.book  Page 35  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments