manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual

Getting Started With Dell PowerEdge R910? Look no further! Download the free user manual for this exceptional server right from our website. Learn how to maximize its performance, configure settings, troubleshoot issues, and more. Don't miss the chance to unlock the full potential of your PowerEdge R910. Get your manual now!

Share
Download
background image

Troubleshooting Your System

189

Troubleshooting Expansion Cards

 

CAUTION: 

Many repairs may only be done by a certified service technician. 

You should only perform troubleshooting and simple repairs as authorized in 
your product documentation, or as directed by the online or telephone service 
and support team. Damage due to servicing that is not authorized by Dell is not 
covered by your warranty. Read and follow the safety instructions that came 
with the product.

 

NOTE: 

When troubleshooting an expansion card, see the documentation for your 

operating system and the expansion card.

1

Run the appropriate online diagnostic test. See "Using Online Diagnostics" 
on page 193.

2

Turn off the system and attached peripherals, and disconnect the system 
from the electrical outlet.

3

Open the system. See "Opening the System" on page 89.

4

Verify that the installed expansion cards are compliant with the expansion 
card installation guidelines. See "Expansion Card Installation Guidelines" 
on page 124.

5

Ensure that each expansion card is firmly seated in its connector. See 
"Installing an Expansion Card" on page 126.

6

Close the system. See "Closing the System" on page 90.

7

Reconnect the system to the electrical outlet, and turn on the system and 
attached peripherals.

8

If the problem is not resolved, turn off the system and attached 
peripherals, and disconnect the system from the electrical outlet.

9

Open the system. See "Opening the System" on page 89.

10

Remove all expansion cards installed in the system. See "Removing an 
Expansion Card" on page 128.

11

Close the system. See "Closing the System" on page 90.

12

Reconnect the system to the electrical outlet, and turn on the system and 
attached peripherals.

13

Run the appropriate online diagnostic test.
If the tests fail, see "Getting Help" on page 203.

book.book  Page 189  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments

Related manuals for PowerEdge R910

Tandy 2000 Technical Reference preview
2000
Brand: Tandy Pages: 493
Cobalt Digital Inc HPF-9000 Product Manual preview
HPF-9000
Brand: Cobalt Digital Inc Pages: 54
WAGO 752-9800 Manual preview
752-9800
Brand: WAGO Pages: 52
IBM PS/2 N51 SX HMR Hardware Maintenance Service preview
PS/2 N51 SX HMR
Brand: IBM Pages: 43
Supero SuperWorkstation 5038A-IL User Manual preview
SuperWorkstation 5038A-IL
Brand: Supero Pages: 122
Advantech UNO-2174A User Manual preview
UNO-2174A
Brand: Advantech Pages: 44
IEI Technology DRPC-120-BT User Manual preview
DRPC-120-BT
Brand: IEI Technology Pages: 121
Fairlight CMI Series III Service Manual preview
CMI Series III
Brand: Fairlight Pages: 439
eMachines H3120 User Manual preview
H3120
Brand: eMachines Pages: 406
Lobo Drives Max-80 Hardware Setup preview
Max-80
Brand: Lobo Drives Pages: 40
Sony VAIO PCV-RX470DS User Manual preview
VAIO PCV-RX470DS
Brand: Sony Pages: 101
Sony VAIO VGN-UX180P Specifications preview
VAIO VGN-UX180P
Brand: Sony Pages: 2
Sony VAIO VGN-T270P Specifications preview
VAIO VGN-T270P
Brand: Sony Pages: 1
Sony VAIO VGN-T250P Specifications preview
VAIO VGN-T250P
Brand: Sony Pages: 1
Sony VAIO VGN-T260P Specifications preview
VAIO VGN-T260P
Brand: Sony Pages: 1
Sony VAIO VGN-T250 Specifications preview
VAIO VGN-T250
Brand: Sony Pages: 1
Sony VAIO VGN-SZ680ND Specifications preview
VAIO VGN-SZ680ND
Brand: Sony Pages: 2
Sony Vaio VGN-UX27CN Service Manual preview
Vaio VGN-UX27CN
Brand: Sony Pages: 23

Brands by name

Popular brands

Load more brands