manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual, Page: 56 / 210

Share
Download
Dell PowerEdge R910 Hardware Owner'S Manual Download Page 56

56

About Your System

Time-of-day not 

set - please run 

SETUP program.

Incorrect Time or Date 
settings; faulty system 
battery.

Check the Time and Date 
settings. See "Using the 
System Setup Program and 
UEFI Boot Manager" on 
page 63. If the problem 
persists, replace the system 
battery. See "System Battery" 
on page 157.

Timer chip 

counter 2 failed.

Faulty system board.

See "Getting Help" on 
page 203.

TPM or TCM 

configuration 

operation 

honored. System 

will now reset.

A Trusted Platform Module 
(TPM) or China Trusted 
Computing Model (TCM) 
configuration command has 
been entered. The system 
will reboot and execute the 
command. 

Information only.

TPM or TCM 

configuration 

operation is 

pending. Press 

(I) to Ignore OR 

(M) to Modify to 

allow this change 

and reset the 

system.

WARNING: 

Modifying could 

prevent 

security.

This message displays during 
system restart after a TPM or 
TCM configuration 
command has been entered. 
User interaction is required 
to proceed.

Enter I or M to proceed. 

TPM or TCM 

failure.

A TPM or TCM function has 
failed. 

See "Getting Help" on 
page 203.

Message

Causes

Corrective Actions

book.book  Page 56  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments