manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual

Getting Started With Dell PowerEdge R910? Look no further! Download the free user manual for this exceptional server right from our website. Learn how to maximize its performance, configure settings, troubleshoot issues, and more. Don't miss the chance to unlock the full potential of your PowerEdge R910. Get your manual now!

Share
Download
background image

184

Troubleshooting Your System

Troubleshooting an Internal SD Card

 

CAUTION: 

Many repairs may only be done by a certified service technician. 

You should only perform troubleshooting and simple repairs as authorized in 
your product documentation, or as directed by the online or telephone service 
and support team. Damage due to servicing that is not authorized by Dell is not 
covered by your warranty. Read and follow the safety instructions that came 
with the product.

1

Enter the System Setup program and ensure that the internal SD card port 
is enabled. See "Integrated Devices Screen" on page 70.

2

Turn off the system, including any attached peripherals, and disconnect 
the system from the electrical outlet. 

3

Open the system. See "Opening the System" on page 89. 

4

Reseat the SD module cable. See "Installing the Internal Dual SD Module" 
on page 141.

 

CAUTION: 

If the Redundancy option is set to Mirror Mode in the Integrated 

Devices screen of the system setup, you must follow the instructions in step 5 to 
step 9 to avoid loss of data. If the Redundancy option is set to Disabled, proceed 
to step 10.

 

NOTE: 

When an SD card failure occurs, the internal dual SD module controller 

notifies the system. On the next reboot, the system prompts you with a message 
indicating the failure.

5

If SD card 1 has failed, remove the card from the SD1 slot. See "Removing 
an Internal SD Card" on page 142. If SD card 2 has failed, install a new SD 
card and proceed to step 8. 

6

Insert the card present in the SD2 slot into the SD1 slot. See "Removing 
an Internal SD Card" on page 142 and "Installing an Internal SD Card" on 
page 142.

7

Insert the new SD card into the SD2 slot.

8

Close the system. See "Closing the System" on page 90.

9

Turn on the system and attached peripherals and check if the SD card is 
functioning.
If the problem is not resolved, 

see 

"Getting Help" on page 203. 

10

Insert a different SD card that you know works properly. 

book.book  Page 184  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments

Related manuals for PowerEdge R910

Panasonic CF-51 Series Supplementary Instructions Manual preview
CF-51 Series
Brand: Panasonic Pages: 12
Panasonic CF-30 Series Supplementary Instructions Manual preview
CF-30 Series
Brand: Panasonic Pages: 16
Panasonic CF-17 Operating Instructions Manual preview
CF-17
Brand: Panasonic Pages: 28
Panasonic CF-07 Series Reference Manual preview
CF-07 Series
Brand: Panasonic Pages: 43
Gateway Profile 6 Hardware Reference Manual preview
Profile 6
Brand: Gateway Pages: 34
Gateway GT5062b Reference Manual preview
GT5062b
Brand: Gateway Pages: 142
Gateway GM5407H Reference Manual preview
GM5407H
Brand: Gateway Pages: 288
Gateway FX6800 Setup Manual preview
FX6800
Brand: Gateway Pages: 2
Gateway DX4200-JB001A Starter Manual preview
DX4200-JB001A
Brand: Gateway Pages: 24
Gateway ALR 8200 User Manual preview
ALR 8200
Brand: Gateway Pages: 52
IBM A40 TYPE 6840 (Arabic) User Manual preview
A40 TYPE 6840
Brand: IBM Pages: 160
DFI DT122-BE User Manual preview
DT122-BE
Brand: DFI Pages: 69
XtendLan RB-851 User Manual preview
RB-851
Brand: XtendLan Pages: 17
UCOM PRO-MIC Instructions For Assembly And Connection preview
PRO-MIC
Brand: UCOM Pages: 3
7starlake ROC285B User Manual preview
ROC285B
Brand: 7starlake Pages: 32
Digital Equipment PDP-12 Reference Manual preview
PDP-12
Brand: Digital Equipment Pages: 321
Panasonic TOUGHBOOK CF-19FHGAX M Series Service Manual preview
TOUGHBOOK CF-19FHGAX M Series
Brand: Panasonic Pages: 90
Vivo CART-V06A Instruction Manual preview
CART-V06A
Brand: Vivo Pages: 12

Brands by name

Popular brands

Load more brands