manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual, Page: 41 / 210

Share
Download
Dell PowerEdge R910 Hardware Owner'S Manual Download Page 41

About Your System

41

System Messages

System messages appear on the screen to notify you of a possible problem 
with the system.

 

NOTE: 

If you receive a system message not listed in the table, check the 

documentation for the application that is running when the message appears or the 
operating system's documentation for an explanation of the message and 
recommended action.

Table 1-2.

System Messages

W1630

Power supply 

redundancy 

degraded. 

Check PSU 

cables.

The power supply subsystem 
is no longer fully redundant, 
but at least one more supply 
can fail before the system is 
at risk of shutting down.

Reseat the power supplies. 
See "Troubleshooting 
Power Supplies" on 
page 179.

If the problem persists, 
see "Getting Help" on 
page 203.

NOTE: 

For the full name of an abbreviation or acronym used in this table, see the 

Glossary

 at 

support.dell.com/manuals

.

Message

Causes

Corrective Actions

Alert! iDRAC6 not 

responding. 

Rebooting.

The iDRAC6 is not 
responding to BIOS 
communication either 
because it is not functioning 
properly or has not 
completed initialization. The 
system will reboot.

Wait for the system to 
reboot.

Code

Text

Causes

Corrective Actions

book.book  Page 41  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments