manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual, Page: 21 / 210

Share
Download
Dell PowerEdge R910 Hardware Owner'S Manual Download Page 21

About Your System

21

Guidelines for Connecting External Devices

•

Turn off power to the system and external devices before attaching a new 
external device. Turn on any external devices before turning on the system 
(unless the documentation for the device specifies otherwise).

•

Ensure that the appropriate driver for the attached device has been 
installed on the system.

•

If necessary to enable ports on your system, use the 

"Using the System 

Setup Program and UEFI Boot Manager

" on page 63

.

NIC Indicator Codes

9

Serial connector

Connects a serial device to the system.

10

Video connector

Connects a VGA display to the system.

1

link indicator

2

activity indicator

Indicator

Indicator Code

Link and activity 
indicators are off

The NIC is not connected to the network.

Link indicator is green

The NIC is connected to a valid network link at 
1000 Mbps.

Item

Indicator, Button, or 
Connector

Icon

Description

1

2

book.book  Page 21  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments