manualshive.com logo in svg

Dell PowerEdge R910, Hardware Owner'S Manual, Page: 29 / 210

Share
Download
Dell PowerEdge R910 Hardware Owner'S Manual Download Page 29

About Your System

29

E141F

CPU # 

protocol 

error. Power 

cycle AC.

The system BIOS reported a 
processor protocol error.

Remove AC power to the 
system for 10 seconds and 
restart the system.

If the problem persists, 
see "Getting Help" on 
page 203.

E1420

CPU Bus 

parity error. 

Power cycle 

AC.

The system BIOS reported a 
processor bus parity error.

Remove AC power to the 
system for 10 seconds and 
restart the system.

If the problem persists, 
see "Getting Help" on 
page 203.

E1421

CPU # 

initializati

on error. 

Power cycle 

AC.

The system BIOS reported a 
processor initialization error.

Remove AC power to the 
system for 10 seconds and 
restart the system.

If the problem persists, 
see "Getting Help" on 
page 203.

E1422

CPU # machine 

check error. 

Power cycle 

AC.

The system BIOS reported a 
machine check error.

Remove AC power to the 
system for 10 seconds and 
restart the system.

If the problem persists, 
see "Getting Help" on 
page 203.

E1610

Power Supply 

# (### W) 

missing. 

Check power 

supply.

Specified power supply was 
removed or is missing from 
the system. 

See "Troubleshooting 
Power Supplies" on 
page 179.

E1614

Power Supply 

# (### W) 

error. Check 

power supply.

Specified power supply 
failed.

See "Troubleshooting 
Power Supplies" on 
page 179.

Code

Text

Causes

Corrective Actions

book.book  Page 29  Wednesday, January 20, 2010  10:20 AM

Summary of Contents for PowerEdge R910



















































































































































































































Reviews:

No comments