444
Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\sources\CxUGSwitching_STP.fm
D E LL C O N F ID E N T IA L – P R E L I M I N A RY 1 0 / 3 0/ 1 3 - F O R P R O O F O N LY
–
BPDU Guard
— Check to enable BPDU Guard on the port.
–
Root Guard
— Check to prevent devices outside the network core
from being assigned the spanning tree root.
–
Port State
— Displays the current STP state of a port. If the port state
is not disabled, it determines what forwarding action is taken on
traffic. The possible port states are:
•
Disabled
— STP is currently disabled on the port. The port
forwards traffic while learning MAC addresses.
•
Blocking
— The port is currently blocked and cannot be used to
forward traffic or learn MAC addresses. Blocking is displayed
when Classic STP is enabled.
•
Listening
— The port is currently in the listening mode. The port
cannot forward traffic nor can it learn MAC addresses.
•
Learning
— The port is currently in the learning mode. The port
cannot forward traffic, however it can learn new MAC addresses.
•
Forwarding
— The port is currently in the forwarding mode. The
port can forward traffic and learn new MAC addresses.
–
Role
— Displays the port role assigned by the STP algorithm that
provides STP paths. The possible options are:
•
Root
— This port provides the lowest cost path to forward packets
to root switch.
•
Designated
— This port is the interface through which the bridge
is connected to the LAN, which provides the lowest cost path
from the LAN to the Root Bridge.
•
Alternate
— This port provides an alternate LAG to the root
switch from the root interface.
•
Backup
— This port provides a backup path to the designated
port. Backup ports occur only when two ports are connected in a
loop by a point-to-point link. Backup ports also occur when a LAN
has two or more connections connected to a shared segment.
•
Disabled
— This port is not participating in the Spanning Tree.
