manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 358

358

Dell PowerConnect 55xx Systems User Guide

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxUGSystemConfig.fm

D E LL   C O N F ID E N T IA L  –   P R E L I M I N A RY   1 0 / 3 0/ 1 3   -   F O R   P R O O F   O N LY

–

Link Local Interface

 — When the server supports an IPv6 Link Local 

address, this specifies the Link Local interface. The possible options 

are:
•

VLAN

 — The VLAN on which the IPv6 interface is configured.

•

ISATAP

 — The IPv6 interface is configured on an ISATAP 

tunnel.

3

Select one of the options:
–

Firmware Upload 

— A firmware file is uploaded. 

–

Configuration Upload 

— A configuration file is uploaded. 

4

Select to upload firmware or a configuration file via a TFTP server in 

Download Protocol

.

5

If 

Firmware Upload

 was selected, enter:

–

TFTP Server IP Address 

— The TFTP server IP address to which the 

software image is uploaded.

–

Destination File Name (1-64 Characters) 

— The file name to which 

the file is uploaded.

6

If 

Configuration Upload 

was selected, enter:

–

TFTP Server IP Address 

— The TFTP server IP address to which the 

configuration file is uploaded.

–

Destination File Name (1-64 Characters) 

— The configuration file 

name/path to which the file is uploaded.

–

Transfer File Name 

— The configuration file that is uploaded. The 

possible options are:
•

Running Configuration 

— Uploads the Running Configuration 

file.

•

Startup Configuration 

— Uploads the Startup Configuration file.

•

User-defined Files 

—

 

Uploads the selected file. A user-defined 

file is only displayed in this list if one was previously created by a 

user, for example, if the user copied the running configuration file 

to a user-defined configuration file called BACKUP-SITE-1, the 

BACKUP-SITE-1 configuration file is displayed in the list and can 

be selected.

7

Click 

Activate

 to start the upload process.

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands