220
Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\sources\CxUGSystemConfig.fm
D E LL C O N F ID E N T IA L – P R E L I M I N A RY 1 0 / 3 0/ 1 3 - F O R P R O O F O N LY
Configuring Two IP Networks on Two Different VLANS Using CLI
The following shows how to configure two IP networks on two different
VLANS using CLI:
To test this setup described in Figure 9-18:
1
Connect a host whose address is 1.1.1.2 to interface 1/0/1 (default route
1.1.1.1)
2
Connect a host whose address 2.1.1.2 to port 1/0/2 (default route 2.1.1.1)
3
Ping from 1.1.1.2 to 2.1.1.2 to verify the configuration
Table 9-25. Sample CLI Script to Configure Two IP Networks on Two Different VLANSs
CLI Command
Description
console#
config
Enter Global Configuration
mode.
console(config)#
vlan database
Enter VLAN mode.
console(config-vlan)#
vlan
100-150
Create VLANs number 100 to
150.
console(config-vlan)#
exit
Exit VLAN mode.
console(config)#
interface
gi1/0/1
Enter Interface mode for port
1 on unit 1.
console(config-if)#
switchport access
vlan
100
Make port a member of
VLAN 100.
console(config-if)#
ip address
1.1.1.1 255.255.255.0
Set the IP address with mask.
console(config-vlan)#
exit
Exit Interface mode for port.
console(config)#
interface
gi1/0/2
Enter Interface mode for port
2 on unit 1.
console(config-if)#
switchport access
vlan
150
Make port a member of
VLAN 150.
console(config-if)#
ip address
2.1.1.1 255.255.255.0
Set the IP address with mask.
console(config-vlan)#
exit
Exit Interface mode for port.
