212
Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\sources\CxUGSystemConfig.fm
D E LL C O N F ID E N T IA L – P R E L I M I N A RY 1 0 / 3 0/ 1 3 - F O R P R O O F O N LY
The previously-assigned IP addresses are displayed.
2
To add an IP address to an interface, click
Add
, and enter the fields:
–
IP Address
— Enter the IP address assigned to the interface.
–
Network Mask
— Select the subnetwork mask to which traffic can be
routed.
–
Prefix Length
— Enter the number of bits that comprise the IP
address prefix of the subnetwork.
–
Interface
— Select the interface for which the IP address is defined.
Select an interface type
Port
,
LAG
, or
VLAN
and the specific
interface number.
Defining IPv4 Interfaces Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the
IPv4 Interfaces Parameters
page.
Table 9-18. IPv4 Interface Parameters CLI Commands
CLI Command
Description
ip address ip-address
{
mask
|
prefix-length
}
no ip address
[
ip-address
]
Sets an IP address.
Use the no form of the command to
remove an IP address.
show ip interface
[[
gigabitethernet
|
tengigabitet
hernet
]
port-number
|
vlan vlan-
id
|
port-channel LAG
-
number
]
Displays the usability status of
interfaces configured for IP.
