manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 147

Dell PowerConnect 55xx Systems User Guide

147

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxU_Switching_NetworkSecurity.fm

D E L L  CO N F I D E N T I A L  –  P R E L I MI N A RY  10 / 3 0 /1 3  -   FO R  PR O O F  O N LY

                         

Table 8-14. Reject Reason Description

Abbreviation

Description

ACL-DEL

ACL was deleted by a user.

ACL-NOTEXST

ACL sent by the RADIUS server does not exist on the device.

ACL-OVRFL

ACL sent by the RADIUS server cannot be applied because of 

TCAM overflow.

AUTH-ERR

Rejected by RADIUS due to wrong user name or password in 

the RADIUS server.

FLTR-ERR

RADIUS accept message contains more than two filter IDs.

FRS-MTH-DENY

First method is 

deny

.

IPv6WithMAC

RADIUS accept message contains filter with IPv6 DIP and 

MAC addresses.

IPV6WithNotIP

RADIUS accept message contains IPv6 and not IP 

simultaneously.

POL-BasicMode

Policy is not supported in the QoS basic mode.

POL-DEL

Policy was deleted by a user.

POL-OVRFL

Policy sent by radius server can not be applied because of 

TCAM overflow.

RAD-APIERR

RADIUS API returned error (e.g. No RADIUS server is 

configured).

RAD_INVLRES

RADIUS server returned invalid packet (e.g. EAP attribute is 

missing).

RAD-NORESP

RADIUS server is not responding.

VLAN-DFLT

VLAN sent by a RADIUS server cannot be applied because it 

is the default VLAN.

VLAN-DYNAM

VLAN sent by RADIUS server cannot be applied because it is 

a dynamic VLAN.

VLAN-GUEST

VLAN sent by RADIUS server cannot be applied because it is 

the Guest VLAN.

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands