manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 43

Dell PowerConnect 55xx Systems User Guide

43

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxUGHardware.fm

D E L L  CO N F I D E N T I A L  –  P R E L I MI N A RY  10 / 3 0 /1 3  -   FO R  PR O O F  O N LY

Table 3-3 describes the LED indications for Gigabit ports on PoE-enabled 

devices.

HDMI Port LEDs

The HDMI ports have a Speed/link (LNK) LED on their left side and an 

activity (ACT) LED on their right side.
Table 3-4 describes the HDMP port LEDs: 

Table 3-3. Giga Port s on PoE-enabled Devices LEDs 

LED

Color

Description 

LNK

Flashing green

Link is up and the port is either transmitting or 

receiving at 1000 Mbs. 

Flashing amber

Link is up and the port is either transmitting or 

receiving data at 100 Mbps.

Solid green
Solid amber

Link is up high speed.
Link is up at lower speeds.

Off

Port is currently not operating.

PoE

Flashing green

There is activity on the port and the PoE is off.

Flashing amber

There is activity on the port and the PoE is on.

Amber solid 

There is no activity on the port and the PoE power is 

on. 

Off

There is no activity on the port and the PoE is off.

Table 3-4. HDMI (Stacking) Port LEDs  

LED

Color

Description 

Speed/Link

Solid green

Port is linked to device. 

Off

Port is currently not operating.

ACT 

Flashing green

Port is either transmitting or receiving.

Off

Port is not transmitting or receiving.

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands