236
Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\sources\CxUGSystemConfig.fm
D E LL C O N F ID E N T IA L – P R E L I M I N A RY 1 0 / 3 0/ 1 3 - F O R P R O O F O N LY
The previously-defined neighbors are displayed along with their states.
The possible states are:
–
Incomplete
— An address resolution is in progress, and the link-layer
address of the neighbor has not yet been determined.
–
Reachable
— The neighbor is known to have been reachable recently
(within tens of seconds).
–
Stale
— The neighbor is no longer known to be reachable, but until
traffic is sent to the neighbor, no attempt is made to verify its
reachability.
–
Delay
— The neighbor is no longer known to be reachable, and traffic
has recently been sent to the neighbor. Rather than probe the
neighbor immediately, however, there is a delay sending probes for a
short while, in order to give upper-layer protocols a chance to provide
reachability confirmation.
–
Probe
— The neighbor is no longer known to be reachable, and
Unicast Neighbor Solicitation probes are being sent to verify
reachability.
2
To clear the Neighbors table, select one of the following options:
–
None
— Does not clear any entries.
–
Static Only
— Clears the static entries.
–
Dynamic Only
— Clears the dynamic entries.
–
All Dynamic and Static
— Clears the static and dynamic address
entries.
3
To add a new IPv6 neighbor, click
Add,
and enter the fields:
–
IPv6 Interface
— Displays the interface on which IPv6 Interface is
defined.
–
IPv6 Address
— Enter the neighbor IPv6 address.
–
MAC Address
— Enter the MAC address assigned to the interface.
