manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 348

348

Dell PowerConnect 55xx Systems User Guide

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxUGSystemConfig.fm

D E LL   C O N F ID E N T IA L  –   P R E L I M I N A RY   1 0 / 3 0/ 1 3   -   F O R   P R O O F   O N LY

Auto Update Configuration through the GUI

To set the auto update and configuration parameters:

.  

NOTE: 

For the automatic options in this page to work the following must be 

implemented:
•

Since Auto-Config depends on retrieving information from a DHCP server, the 

startup configuration needs to include a DHCP IP interface. The device is 

defined as a DHCP client, as described in "DHCP IPv4 Interface" on page 214. 

After reboot, this command is not saved in the Startup configuration.

•

Preparations described above must be completed on the DHCP server and 

TFTP servers.

1

Click 

System 

> 

File Management 

> 

Auto Update of 

Configuration/Image File 

in the tree view to display the 

Auto Update of 

Configuration/Image File

 page. 

Figure 9-54. Auto Update of Configuration/Image File

The auto-update-configuration options are displayed.

2

Modify the auto-update configuration parameters as required:
–

Configuration Auto-Config (boot host auto-config)

— Enable/disable 

automatic download of the configuration parameters to the Running 

Configuration file. By default, this occurs only if the Startup 

Configuration file is empty. 

–

Firmware Auto-Update (boot host auto-update)

— Enable/disable 

automatic download of the image file. 

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands