manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 142

142

Dell PowerConnect 55xx Systems User Guide

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxU_Switching_NetworkSecurity.fm

D E LL   C O N F ID E N T IA L  –   P R E L I M I N A RY   1 0 / 3 0/ 1 3   -   F O R   P R O O F   O N LY

• Authenticated ports are added to the supplicant VLAN as 

untagged. 

• Authenticated ports remain unauthenticated VLAN and Guest 

VLAN members. Static VLAN configuration is not applied to the 

port.

• The following list of VLANs cannot participate in DVA: an 

Unauthenticated VLAN, a Dynamic VLAN that was created by 

GVRP, a Voice VLAN, a Default VLAN and a Guest VLAN.

• Delete the supplicant VLAN while the supplicant is logged in. 

The supplicant is authorized during the next re-authentication if 

this supplicant VLAN is re-created, or a new VLAN is configured 

on the RADIUS server.

 

NOTE: 

DVA provides the same functionality as the MAC to VLAN Assignment 

feature, but does so in a standard way. Therefore, when DVA is available, 

MAC to VLAN Assignment is not available.

–

Guest VLAN

 — Enable/disable port access to the Guest VLAN. If 

enabled, unauthorized users, connected to this interface, can access 

the Guest VLAN.

–

Dynamic Policy / ACL Assignment 

— Enable/disable this feature.

–

Periodic Reauthentication

 — Select to enable port re-authentication 

attempts after the specified Reauthentication Period.

–

Reauthentication Period (300-4294967295) 

— Enter the number of 

seconds after which the selected port is reauthenticated.

–

Reauthenticate Now

 — Select to enable immediate port 

re-authentication.

–

Authentication Server Timeout (1-65535)

 — Enter the time interval 

that lapses before the device resends a request to the authentication 

server. The field value is specified in seconds.

–

Resending EAP Identity Request (1-65535)

 — Enter the amount of 

time that lapses before EAP request are resent.

–

Quiet Period (0-65535)

 — Enter the number of seconds that the 

device remains in the quiet state, following a failed authentication 

exchange.

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands