manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 340

340

Dell PowerConnect 55xx Systems User Guide

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxUGSystemConfig.fm

D E LL   C O N F ID E N T IA L  –   P R E L I M I N A RY   1 0 / 3 0/ 1 3   -   F O R   P R O O F   O N LY

Setup File Format

A line in a setup file contains all or some of the above fields separated by 

spaces (in the following order):

<MAC-Address> <New-IP-Address> <New-IP-Mask> <Configuration-

File-Name> <Image-File-Name> <flag>
If the <flag> field is omitted, it is considered to be blank.

A line can be in one of the following formats: 

• Format A—Contains all possible fields:

<MAC_address (of device)> <New_IP_Address> <New_IP_Mask> 

<Configuration-File-Name> <Image-File-Name> <flag>

Examples:

–

0080.c200.0010  192.168.0.10  255.255.255.0  switch-X.text  pc5500-

4018.ros
This means that the line applies to the device with MAC address: 

0080.c200.0010

; a new IP address of 

192.168.0.10

 is to be assigned to 

the device, with mask: 

255.255.255.0

. The 

switch-x.text

 is the Startup 

Configuration file and 

pc5500-4018.ros

 is the new image file.

–

0080.c200.0010  192.168.0.10  255.255.255.0  switch-X.text  pc5500-

4018.ros in-use
This line will not be used because the flag is 

in-use

 indicating that it 

has already been used for some device, and it would be incorrect to use 

if for another device.

–

0080.c200.0010  192.168.0.10  255.255.255.0  switch-X.text  pc5500-

4018.ros invalid
This line will not be used because the flag is 

invalid

 indicating that it 

is failed in the past.

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands