manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 342

342

Dell PowerConnect 55xx Systems User Guide

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxUGSystemConfig.fm

D E LL   C O N F ID E N T IA L  –   P R E L I M I N A RY   1 0 / 3 0/ 1 3   -   F O R   P R O O F   O N LY

Triggering the Auto-Update/Configuration Process

When the Auto-Update/Configuration feature is enabled (in the Auto 

Update of Configuration/Image File page), the device automatically attempts 

to download a new image or configuration file (under certain circumstances) 

using one of the following processes:

• The Auto-Update process is triggered from the USB drive if a USB key in 

the USB drive is found. 

• The Auto-Configuration process is triggered from the USB drive after the 

Auto-Update process completed and the device was rebooted (if a new 

image file was loaded), and if the following conditions are fulfilled:
–

There is a USB key in the USB drive.

–

Force Configuration Download at Next Startup has been enabled by 

the boot host dhcp command, or the Startup Configuration file is 

empty.

See "Performing Auto-Update from a USB Drive" on page 343.

• The Auto-Update from a TFTP server is triggered if the following 

conditions are fulfilled:
–

The conditions for a USB Auto-Update are not fulfilled.

–

An IP address of a TFTP server is received from a DHCP server.

–

A file name is received from DHCP server.

• The Auto-Configuration from a TFTP server is triggered if the following 

conditions are fulfilled: 
–

The conditions for USB Auto-Configuration are not fulfilled.

–

The switch as DHCP client received a configuration file name or a 

TFTP URL.

–

Force Configuration Download at Next Startup enabled by the boot 

host dhcp command, or, the Startup Configuration file is empty.

See "Preparations for Using Auto Configuration from a TFTP Server" on 

page 345.

NOTES: 

• DHCP client never triggers the Auto-Update process from a TFTP server 

after attempting (whether successfully or not) to auto-update/configure 

configuration/image file from the USB drive. 

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands