manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 165

Dell PowerConnect 55xx Systems User Guide

165

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxUGSystemConfig.fm

D E L L  CO N F I D E N T I A L  –  P R E L I MI N A RY  10 / 3 0 /1 3  -   FO R  PR O O F  O N LY

–

Consumed Power 

— The amount of the power used by the device, in 

watts.

3

Enter the following parameters:
–

Power Limit Mode

 — Enter one of the following options for the 

system power limit mode.
•

Port

 — The power limit of the port depends on port 

configuration.

•

Max Port Power

 — In this mode, each port can get up to the 

maximum power, which is 15.4W.

–

System Usage Threshold (1-99 Percent)

 — Enter the percentage of 

power consumed before a trap is generated. 

–

Traps 

— Enable/disable PoE traps on the device. If enabled, traps are 

generated if one of the following situations occurs:
• Status change to port delivering/not delivering power to PD
• Indication that power usage is above the defined threshold
• Indication that power usage is below the threshold

NOTE: 

If traps are enabled, you must also enable SNMP, and configure at least one SNMP 

notification recipient.

4

To view PoE port settings for a unit in the stack, select its 

Unit ID

. The 

port PoE parameters are displayed for all ports on the unit. The fields 

displayed in this block are described in the 

Edit

 page.

5

To set PoE settings for a port, click 

Edit

. 

6

Select a port in the 

Port

 field, and enter the following PoE parameters for 

the PDs connected to this port.
–

PoE Admin Status

 — Select the device PoE mode. The possible 

options are: 
•

Auto

 — Enables the Device Discovery protocol, and provides 

power to the device using the PoE unit. The Device Discovery 

Protocol enables the device to discover Powered Devices attached 

to the device interfaces, and to learn their classification. 

•

Never

 — Disables the Device Discovery protocol, and stops the 

power supply to the device using the PoE module.

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands