manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 343

Dell PowerConnect 55xx Systems User Guide

343

FILE LOCATION:  C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell 

Contax\sources\CxUGSystemConfig.fm

D E L L  CO N F I D E N T I A L  –  P R E L I MI N A RY  10 / 3 0 /1 3  -   FO R  PR O O F  O N LY

• If the auto process involved setting the IP address of the device from the 

setup file, the auto process from the TFTP server can be triggered.

• If the USB drive contains a setup file, but that setup file does not include a 

line that can be used for the current device, the DHCP client is able to 

trigger the Auto-Update process from TFTP (because the USB process 

never started at all).

Automatic DHCP IP Interface Assignment

The user can manually define a DHCP interface in the DHCP IPv4 page.
If the user does not do this, the switch automatically creates a DHCP 

interface on the VLAN with the lowest VLAN ID that does not have an IP 

address defined on it after boot if both of the following conditions are 

fulfilled:

• There is no DHCP IP interface. 
• There is a VLAN without an IP address.

Preparations for Using Auto Update/Configuration from a USB Drive

Before Auto-Update/Configuration from a USB drive can be performed, the 

following steps must be performed:

1. Enable Auto-Update/Configuration in the Auto Update of 

Configuration/Image File page.

2. (Optional) Create a line in the setup file for this device containing the 

required options and load it on the USB key.

3. Load configuration/image files on the USB key as required.
4. Insert the USB key in the USB drive and reboot the device.

Performing Auto-Update from a USB Drive

When Auto-Update is initiated from a USB drive, the following steps are 

performed:

1. Locate the correct setup file—The USB drive is searched for a setup file. 

One of the following can occur:

–

Setup file is not found—The root folder of the USB is searched for an 

image files (with 

.ros

 extension). 

• The image file with the most recent version is loaded into the 

image file if the versions are different.

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands