manualshive.com logo in svg

Dell PowerConnect 5500 Series, System User'S Manual

Share
Download
Dell PowerConnect 5500 Series System User'S Manual Download Page 2

Notes, Cautions, and Warnings

 

NOTE: 

A NOTE indicates important information that helps you 

make better use of your system.

 

CAUTION: 

A CAUTION indicates potential damage to 

hardware or loss of data if instructions are not followed.

 

WARNING:  

A WARNING indicates a potential for property 

damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.
© 2013 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written 
permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, 
OptiPlex™, Latitude™, PowerEdge™, PowerVault™, PowerConnect™, 
OpenManage™, EqualLogic™, KACE™, FlexAddress™ and Vostro™ are 
trademarks of Dell Inc. Intel

®

, Pentium

®

, Xeon

®

, Core™ and Celeron

®

 are 

registered trademarks of Intel Corporation in the U.S. and other countries. 
AMD

®

 is a registered trademark and AMD Opteron™, AMD Phenom™, and 

AMD Sempron™ are trademarks of Advanced Micro Devices, Inc. Microsoft

®

, 

Windows

®

, Windows Server

®

, MS-DOS

®

 and Windows Vista

®

 are either 

trademarks or registered trademarks of Microsoft Corporation in the United 
States and/or other countries. Red Hat Enterprise Linux

®

 and Enterprise Linux

®

 

are registered trademarks of Red Hat, Inc. in the United States and/or other 
countries. Novell

®

 is a registered trademark and SUSE ™ is a trademark of 

Novell Inc. in the United States and other countries. Oracle

®

 is a registered 

trademark of Oracle Corporation and/or its affiliates. Citrix

®

, Xen

®

, XenServer

®

 

and XenMotion

®

 are either registered trademarks or trademarks of Citrix 

Systems, Inc. in the United States and/or other countries. VMware

®

, Virtual 

SMP

®

, vMotion

®

, vCenter

®

, and vSphere

®

 are registered trademarks or 

trademarks of VMWare, Inc. in the United States or other countries.

Other trademarks and trade names may be used in this publication to refer to 
either the entities claiming the marks and names or their products. Dell Inc. 
disclaims any proprietary interest in trademarks and trade names other than its 
own.

Regulatory Models PC5524, PC5524P, PC5548 and PC5548P

October 2013 A08

Summary of Contents for PowerConnect 5500 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands