Dell Latitude D630 XFR User Manual Download Page 17

Page: 17 / 106

Select Yes.

The computer reboots and the transfer is complete.

Using a Battery

4.1

Battery Performance

NOTE:

For information about the warranty for your computer, see the Limited Warranty document.

For optimal computer performance and to help preserve BIOS settings, operate your Dell portable computer with the main

battery installed at all times. One battery is supplied as standard equipment in the battery compartment.

NOTE: Because the battery may not be fully charged, use the AC adapter to connect your new computer to an

electrical outlet the first time you use the computer. For best results, operate the computer with the AC adapter

until the battery is fully charged. To view the battery charge status, check the Power Meter in Power Options (see

“

141H

Accessing Power Options Properties”).

Battery operating time varies depending on operating conditions. You can install an optional second battery in the XBay to

significantly increase operating time.

NOTE:

Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how

often the battery is used and the conditions under which it is used, you may need to purchase a new battery during

the life of your computer.
NOTE: It is recommended that you connect your computer to an electrical outlet when writing to a CD or DVD

Operating time is significantly reduced when you perform operations including, but not limited to, the following:

Using optical drives

Using wireless communications devices, PC Cards, media memory cards, or USB devices

Using high-brightness display settings, 3D screen savers, or other power-intensive programs such as complex 3D

graphics applications

Running the computer in maximum performance mode. See "

142H

Configuring Power Management

Settings" for information about accessing Windows Power Options Properties or Dell Quickset, which you can use

to configure power management settings.

You can check the battery charge (see "

143H

Checking the Battery Charge") before you insert the battery into the computer.

You can also set power management options to alert you when the battery charge is low.

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery

only with a compatible battery purchased from Dell. The battery is designed to work with your

computer. Do not use a battery from other computers with your computer.
CAUTION:

Do not dispose of batteries with household waste. When your battery no longer holds a

charge, call your local waste disposal or environmental agency for advice on disposing of a lithium-ion

battery. See "

144H

Battery Disposal".

CAUTION:

Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture,

incinerate, disassemble, or expose the battery to temperatures above

C (149

. Keep the battery

away from children. Handle damaged or leaking batteries with extreme care. Damaged batteries may
leak and cause personal injury or equipment damage. Maximum system storage temperature is

(160

F) without the battery installed.

4.2

Checking the Battery Charge

The Dell QuickSet Battery Meter, the Microsoft Windows Power Meter window and icon, the battery charge gauge and

health gauge, and the low-battery warning provide information on the battery charge.

4.2.1

Dell™ QuickSet Battery Meter

Summary of Contents for Latitude D630 XFR











































































































Search results

Summary of Contents for Latitude D630 XFR

Reviews:

Related manuals for Latitude D630 XFR

Brands by name

Popular brands

Dell Latitude D630 XFR, User Manual

Search results

Summary of Contents for Latitude D630 XFR

Reviews:

Related manuals for Latitude D630 XFR

Brands by name

Popular brands