Dell Latitude D630 XFR User Manual Download Page 45

Page: 45 / 106

Gold contact pad

Smart card (top)

Slide the smart card into the smart card slot until the card is completely seated in its connector. The smart card

will protrude approximately 1/2 inch from the slot. The smart card slot is located below the PC Card slot.

If you encounter too much resistance, do not force the card. Check the card orientation and try again.

Figure 10 3 Standard Smart Card Reader

10.2.2.2

Installing a Smart Card into the Enclosed Smart Card Reader

You can install a smart card in the computer while the computer is running. The computer automatically detects the card.

To install a smart card into the enclosed smart card reader:

The smart card reader is located behind the Audio/Wi-Fi door. Lower the hinged door on the left side of the

notebook that protects the smart card reader slot. See Figure 10-1 above.

Hold the card so that the gold contact pad is facing upward and pointing toward the smart card slot. See Figure

10-2 above.

Slide the smart card into the smart card slot until the card is completely seated in its connector.

The smart card will be fully inside the card reader slot and you can close the protective hinged door while the card

is inserted. See Figure 10-4 below.

If you encounter too much resistance, do not force the card. Check the card orientation and try again.

Figure 10 4 Enclosed Smart Card Reader

Summary of Contents for Latitude D630 XFR











































































































Search results

Summary of Contents for Latitude D630 XFR

Reviews:

Related manuals for Latitude D630 XFR

Brands by name

Popular brands

Dell Latitude D630 XFR, User Manual

Search results

Summary of Contents for Latitude D630 XFR

Reviews:

Related manuals for Latitude D630 XFR

Brands by name

Popular brands