Dell 2130 Color Laser, User Manual

Page: 183 / 204

3. Press How to Install Options button.
4. Press Wireless Printer Adapter .
5. Press Skip video to launch the wireless settings tool.
6. In the list on the Select Printer screen, select the target printer that you are making wireless setting for, and then click Next .
7. On the Enter Wireless Network Settings screen, set each wireless setting item, and then click Next .
8. On the Select IP Mode screen, select the IP mode you want to setup, and then click Next .
When IPv4 Only is selected:
On the Enter IPv4 Address Settings screen, set each setting item, and then click Send to send the wireless settings to the printer.
When IPv6 Only is selected:
On the Enter IPv6 Address Settings screen, set each setting item, and then click Send to send the wireless settings to the printer.
When Dual Stack (both IPv4 and IPv6) is selected:
a. On the Enter IPv4 Address Settings screen, set each setting item, and then click Next .
b. On the Enter IPv6 Address Settings screen, set each setting item, and then click Send to send the wireless settings to the printer.
9. On the Complete Wireless Settings screen, click Finish to complete the wireless setting and close the wireless settings tool.
Scene 2. Construct new wireless network environment for both computer and printer (When wireless setting
needs to be set to your computer)
1. Connect the printer to your computer using USB cable.
2. Insert the Drivers and Utilities CD into your computer to start Easy Setup Navigator .
3. Press How to Install Options button.
4. Press Wireless Printer Adapter .
5. Press Skip video to launch the wireless settings tool.
6. In the list on the Select Printer screen, select the target printer that you are making wireless setting for, and then click Next .
7. On the Enter Wireless Network Settings screen, set each wireless setting item, and then click Next .
8. On the Select IP Mode screen, select the IP mode you want to setup, and then click Next .
When IPv4 Only is selected:
On the Enter IPv4 Address Settings screen, set each setting item, and then click Send to send the wireless settings to the printer.
When IPv6 Only is selected:
On the Enter IPv6 Address Settings screen, set each setting item, and then click Send to send the wireless settings to the printer.
When Dual Stack (both IPv4 and IPv6) is selected:
a. On the Enter IPv4 Address Settings screen, set each setting item, and then click Next .
b. On the Enter IPv6 Address Settings screen, set each setting item, and then click Send to send the wireless settings to the printer.
9. On the Complete Wireless Settings screen, click Finish to complete the wireless setting and close the wireless settings tool.
10. Create the wireless setting sent to the printer on your computer following the steps below.
NOTE: If the CD does not automatically launch, click start ® All Programs (for Windows Vista only) ® Accessories (for Windows Vista only) ® Run ,
and then type D:\setup_assist.exe (where D is the drive letter of your CD), and then click OK .
NOTE: If your computer provides a wireless printer adapter tool, change the wireless settings using this tool. Or you can change the wireless
settings using the tool provided by the operating system. See the instructions below.