Dell 2130 Color Laser User Manual Download Page 135

Page: 135 / 204

Back to Contents Page

Installing the Print Head Device (PHD) Unit and Toner Cartridges

Installing the Print Head Device (PHD) Unit

Installing the Toner Cartridges

Installing the Print Head Device (PHD) Unit

Remove the tape from the printer and pull the protective sheet out of the printer.

Installing the Toner Cartridges

Open the side cover.

Completely remove the eight yellow ribbons.

Press and slide the blue latches of four toner cartridges to the locked position.

Close the side cover.

CAUTION:

Before performing any of the following procedures, read and follow the safety instructions in your

Product Information Guide

Summary of Contents for 2130 Color Laser













































































































































































































Search results

Summary of Contents for 2130 Color Laser

Reviews:

Related manuals for 2130 Color Laser

Brands by name

Popular brands

Dell 2130 Color Laser, User Manual

Search results

Summary of Contents for 2130 Color Laser

Reviews:

Related manuals for 2130 Color Laser

Brands by name

Popular brands