Dell 2130 Color Laser User Manual Download Page 174

Page: 174 / 204

Remove the control board cover.

With the connector of the memory toward the slot, insert the memory vertically into the slot.

Push the memory into the slot firmly.

Install the control board cover.

NOTE:

Take off the below edge of the control board cover by turning the control board cover on hinge in the above edge. Next, remove the control

board cover by pulling it from the printer.

NOTE:

Ensure that the memory is firmly fixed in the slot and cannot be moved easily.

NOTE:

Insert the above hinge of the control board cover into the above slit on the printer. Next, insert the below hinge of the control board cover

into the below slit on the printer.

Summary of Contents for 2130 Color Laser













































































































































































































Search results

Summary of Contents for 2130 Color Laser

Reviews:

Related manuals for 2130 Color Laser

Brands by name

Popular brands

Dell 2130 Color Laser, User Manual

Search results

Summary of Contents for 2130 Color Laser

Reviews:

Related manuals for 2130 Color Laser

Brands by name

Popular brands