Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 109

Page: 109 / 155

AUSTROMAT

624 / 644

Operation

Operating Instructions (Version 01/2012)

109

6.3.3.

With VNC program (optional)

NOTE:
This functionality is available as an option.

•

The options that are enabled for your firing furnace can be found in the menu

Setup > Furnace ID > Options

(see section 5.7.2.1).

•

You can find information on enabling options in section 7.5.

NOTE:
To use the firing furnace via a VNC, a suitable VNC program needs to be installed on the
computer. The VNC function of the firing furnace must be activated (section 5.7.1.5).

Start the VNC program

1. Start the VNC program on the computer.

2. Enter the IP address for the firing furnace and the password (see section 4.4.3). The

Program Manager opens (see section 5.3).

The remaining procedure is the same as that in section 6.3.1.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands