Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 95 / 155

AUSTROMAT
®
624 / 644 5. User interface
Operating Instructions (Version 01/2012) 95
5.7.3.3. Temperature calibration
NOTE:
When calibrating the temperature, observe the following:
•
Only use the DEKEMA calibration set for this type of unit,
• Preheat the firing oven well,
•
Always use the fiber firing table.
In the "Setup" menu, click the [Temperature calibration] button. The following temperature
calibration window appears. The set CCF value is shown.
Fig. 5-31 Setup > Temperature calibration
Buttons • [Start]:
Starts temperature calibration.
•
[ESC]:
Closes the window and switches back to the "Setup" menu. The
changes will not be saved.
Calibrate temperature The procedure for calibrating the temperature is in section 7.2. You
can terminate the program at any time when you click the [Stop]
button. A safety query appears and asks if you really want to end the
program:
•
[OK]: Confirm your decision and end the program.
•
[ESC]: Change your decision and continue the program.
Change CCF value • Click on the CCF value. The numeric keyboard window
appears.
• Enter the desired CCF value.