Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 96 / 155

5. User interface AUSTROMAT
®
624 / 644
96 Operating Instructions (Version 01/2012)
5.7.3.4. Seal test
The tightness test checks all the components of the vacuum system and the firing chamber for a
sufficient seal and provides an error analysis. Run this program occasionally to prevent
improper firing. We recommend cleaning the seals and lift seat before starting the tightness test
(see section 7.1).
In the "Setup" menu, click the [Seal test] button. The following window appears to perform the
tightness test.
Fig. 5-32 Setup > Seal test
Buttons •
[Start]:
Starts the tightness test.
•
[ESC]:
Closes the window and switches back to the "Setup" menu. The
changes will not be saved.
Start the program Click on [Start]. The "Tightness test" window is displayed as long as
the program is running. You can terminate the program at any time
when you click the [Stop] button. A safety query appears and asks if
you really want to end the program:
• [OK]: Confirm your decision and in the program,
•
[ESC]: Change your decision and continue the program.
Pressure display Shows the pressure in the firing chamber.