Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 91 / 155

AUSTROMAT
®
624 / 644 5. User interface
Operating Instructions (Version 01/2012) 91
5.7.2.4. Heating settings
In the "Setup" menu, click the [Heating settings] button. The following window is displayed for
setting customer-specific maximum levels for the rise rate in [°C/min].
Fig. 5-26 Setup > Heating settings
Buttons •
[OK]:
Accepts the settings and switches back to the "Setup" menu.
Change the maximum
rise rate The maximum rise rate limits the temperature ramp of the firing
furnace. Change the maximum rise rate as follows:
•
Click the temperature field. The numeric keyboard window
appears.
• Enter the desired value.
A table with the maximum heating speeds can be found in the appendix (see section 9.3).
5.7.2.5. Long-term readiness
When the function "Long-term readiness" is turned on, you can turn on the "Sleep mode" of the
firing furnace in the Program Manager (see section 5.5.5).
Fig. 5-27 Setup > Long-term readiness
Click on the button to activate and deactivate the "Long-term readiness" function. An LED within
the button indicates that the function is active
The power consumption of the firing furnace in "Sleep mode" is approximately 10 W.