Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 120

Page: 120 / 155

6. Operation

AUSTROMAT

624 / 644

120

Operating Instructions (Version 01/2012)

6.8.

Loading and saving sets

A “set” is a group of all manufacturer-related firing programs (program list).

6.8.1.

Download set from the internal memory

Use the following procedure to load individual firing programs or a complete set from the
internal memory of the firing furnace.

1. Open the Program Manager.

2. Click the button [Load set]. The “Set Manager” window appears.

Fig. 6-8

"Set Manager" window

3. Select the desired set.

4. Click on [Load].

(Press [ESC] to return to the Program Manager without loading the set.)

5. The Program Manager displays the "Load set" window. Continue as described in section

6.6.2.

The message "Successfully loaded" appears after the set has been loaded. Click [OK] to return
to the Program Manager.

6.8.2.

Load set from a USB stick

The procedure for loading a set from a USB stick is described in section 6.6.2.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands