Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 64 / 155

5. User interface AUSTROMAT
®
624 / 644
64 Operating Instructions (Version 01/2012)
5.5.5. Sleep mode (long-term ready mode)
NOTE:
Sleep mode is only available when it is activated in the "Setup" menu (see section
5.7.2.5).
The power consumption of the firing furnace in "Sleep mode" is approximately 10 W.
Sleep mode procedure:
•
After the program ends (lift moves up), an acoustic signal sounds,
• Long-term readiness is displayed in the Program Manager by an LED within the [SLEEP]
button. The [Cancel program] button remains available,
•
The heating is turned off. The firing furnace cools to the firing chamber temperature of
100°C and then closes. The firing chamber continues to cool,
•
The screen saver is activated after a set period (see section 5.7.1.4),
Ending "Sleep mode"
"Sleep mode" is ended by pressing any key. The following actions automatically occur:
•
The lift moves to the bottom position (L0).
• The furnace heats to the start temperature. The message "Long-term readiness aborted"
also appears. Remove the fired object. The firing chamber is set to the start temperature.”
•
Confirm the entry by pressing [OK]. The firing furnace normally returns to the last program.
After a power failure or restarting, it returns to the start window.
NOTE:
Only operate the firing furnace under supervision.