Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 135

Page: 135 / 155

AUSTROMAT

624 / 644

7. Maintenance and Service

Operating Instructions (Version 01/2012)

135

Questions regarding software options

Contact your service partner, or contact DEKEMA directly. You will need the serial number of
your firing furnace: Menu path: Setup > Furnace ID (see section 5.7.2.1).

Enable a software option

Requirement: The enabling code for the software option.

To enable the software functions, proceed as follows:

1. Open the Setup menu.

2. Click the [Furnace ID] button. The "Furnace ID" window opens.

Fig. 7-3

"Furnace ID" window

3. Click on [Options]. The "Options" window opens.

Fig. 7-4

"Options" menu

4. Click on the button for the software option (not activated) for which you have received the

enabling code. This opens the input window for the enabling code.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands