Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 79

Page: 79 / 155

AUSTROMAT

624 / 644

5. User interface

Operating Instructions (Version 01/2012)

Function

Description

See section

Maintenance programs

[Check program]

Executes the check program to check the
function of the most important components.

5.7.3.1

[Cleaning firing]

Runs a cleaning firing.

[Temperature calibration]

Calibrates the temperature and sets the
CCF value (calibration factor).

5.7.3.3

[Seal test]

Runs a seal test of all components in the
vacuum system.

5.7.3.4

[Transport bracing]

Protects sensitive components in the firing
chamber during transportation.

5.7.3.5

Data recording and transfer

[Printer]

Specifies a printer for the firing furnace.

5.7.4.1

[Quality management]

Option
Determines if a QM report is displayed after
a program.

5.7.4.2

[Diagnostic data]

Shows the diagnostic data that is created
by the check program.

5.7.4.3

[Login data]

Option
Defines the authorizations to use the firing
furnace via the web interface.

5.7.4.4

[Backup / Recovery]

Backs up and restores the data in the firing
furnace control.

5.7.4.5

[FTP Server Login]

Option
Defines the access to the firing furnace on
an FTP server.

5.7.4.6

Tab. 5-9

Functions in the "Setup" menu

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands