Dekema AUSTROMAT 624, Operating Instructions Manual

Page: 92 / 155

5. User interface AUSTROMAT
®
624 / 644
92 Operating Instructions (Version 01/2012)
5.7.2.6. Lift settings
NOTE:
For safety reasons, we recommend not deactivating the warning.
In the "Setup" menu, click the [Lift settings] button. The following window to specify the behavior
of the firing furnace in critical lift positions is displayed.
Fig. 5-28 Setup > Lift settings
Buttons •
[OK]:
Accepts the settings and switches back to the "Setup" menu.
Safe lift position (only
644 )
After a pressing procedure, the developed heat can in rare instances
(for example when the plunger is not completely clean) cause the
plunger to stick to the ceramic plate. The plunger can then fall out of
the firing chamber during cooling. To prevent burns, we recommend
moving the lift to the safe position after pressing and checking if the
plunger and muffle are on the press table.
Click the button to move the lift to the save position after pressing is
over. An LED within the button indicates that the function is active
Warning When the "Warning" function is turned on, a warning appears before
you open a hot firing chamber (temperature higher than 200°C). You
are asked, "OPEN LIFT?". Confirm the query when you want to
move the lift down and open the hot firing chamber.
Click the button to activate the warning display. An LED within the
button indicates that the function is active