Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 102

Page: 102 / 155

5. User interface

AUSTROMAT

624 / 644

102

Operating Instructions (Version 01/2012)

Release the function
keys for furnace
commands via the
Webserver

In order for you to execute touchscreen functions (see section 3.2)
via the Webserver, the function keys of the computer keyboard must
be released.

Click the button to release or block the function keys for the furnace
commands. An LED within the button indicates that the function is
active

5.7.4.5. Backup / Recovery

NOTE:
For reasons of data safety and to prevent the loss of firing oven data, it is
recommendable to regularly back up all your data.

In the "Setup" menu, click the [Backup/Recovery] button. The following window for backing up
and recovering data appears.

Fig. 5-38

Setup > Backup / Recovery

Buttons

•

[Backup

Start]:

Starts backing up the data.

•

[ESC]:

Closes the window and switches back to the "Setup" menu.

•

[Recovery

Start]:

Starts recovering the data.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands